I imagine the sliding table saw topics have been seriously beaten up on here. I am after more of am i comparing apples to apples here. Have an online business. Currently have a Grizzy hybrid cabinet saw and cut a lot of 1/4" MDF core white melamine. If there is a mealmine blade in existence i have tried them all. Some are awful, others pretty good. The one thing i know i get in a slider is a scoring blade and it is hands down the cleanest cut in melamine. My saw runs with dust collection both underneath and overhead. I dont need a full sheet compacity cutting but my pieces i work with are 16x48 so the slide would be beneficial from a control standpoint. These are the links to the 2 saws i am looking at.
https://lagunatools.com/industrial/panelsaws/p12-5/
https://www.felder-group.com/en-us/p...saw-k3-p579501
Felder a few $$ cheaper but like the dust collector setup on the Laguna. Also know they use different slide mechanics.
Appreciate any feedback.