Results 1 to 5 of 5

Thread: tracing a camera shadow projected on the drawing board

  1. #1

    tracing a camera shadow projected on the drawing board

    using a high accuracy drawing board I projected a camera shadow and will show how to trace it out for a perfect fit and cutting this dxf file with a co2 laser

    https://stankern.vids.io/videos/069e...-drawing-board
    Attached Images Attached Images

  2. #2
    Join Date
    Feb 2003
    Location
    Hayes, Virginia
    Posts
    14,397

  3. #3
    thanks Keith, I am still looking for a different light source something that i can vary the focal length
    Right now with this setup I can only trace items 18x18 in and the camera is overhead under 8 foot
    but a camera that can focus is the trick , you end up with a sharp shadow edge and place a 1/4 spacer under the object

    stan

  4. #4
    Based on context, I think when you said "the camera is overhead" and "a camera that can focus", you meant "light" instead of "camera". However, why not use an overhead camera to capture an image of the object (along with an XY reference scale) and then trace the outline of the object from the image?

  5. #5
    I did not mean camera but projector(using an old kodak projector , very strong light)
    And yes an over head camera would work , in fact I have a video coming up showing this
    but a few small companies were using this shadow technique for packing instruments and i thought
    i would have a go at it, and i am quite pleased with the results, especially something quite shapely
    or lots of edges and its quick
    The video coming is I took a photo of an RV graphic and traced it out and cut a new vinyl graphic
    worked perfect but the camera has to be perfectly level 90 degrees (no distortion)
    stan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •