What type of axe head is this

[Luis Reyes]

Hi All,

I know nothing about axes but was recently given these two heads when I bought the router plane. I didn’t really want them but I had to take them. I don’t think these can do anything anymore but they look old.

Does anyone know anything about these or if I should try to remove the rust to see if there is any branding?

AC8464C8-C5B1-4ADC-B9C5-E3DCA6C2CFE8.jpgCEB02A79-3D2B-4283-A6E0-04B65220FF4E.jpgC33F7736-54E3-4AD5-A639-EB7FF461FEC0.jpg

[Prashun Patel]

They could be splitting wedges or meant for a maul.

[Scott Winners]

If you look at the tops or bottoms, do they have through holes for a handle to be mounted? The mushrooming on both indicates they have been hammered on some.

If they have pretty small through holes, like for a framing hammer or a small engineer's sledge they might be what a blacksmith would call a chisel- a cutting tool for red hot metal.