Results 1 to 5 of 5

Thread: Miter Spring clamp question

  1. #1
    Join Date
    Mar 2006
    Location
    Fort Wayne, IN
    Posts
    555

    Miter Spring clamp question

    I'm considering adding some miter spring clamps for frames and small moldings. I've never used them before and wondered what's the best way to deal with the holes they leave?

    Thanks
    Cliff
    The problem with the world is that intelligent people are full of doubts, while the stupid ones are full of confidence.
    Charles Bukowski

  2. #2
    Steam and fill. If you can't tolerate filler, use temporary clamping ears fastened with hot melt or paper joints.

  3. #3
    Join Date
    Feb 2014
    Location
    Lake Gaston, Henrico, NC
    Posts
    8,973
    The holes are not very big.

  4. #4
    Join Date
    Jan 2008
    Location
    Whidbey Island, WA
    Posts
    444
    If it matters, I use wax sticks.
    JonathanJungDesign.com

  5. #5
    The holes are very small. Make sure you buy Collins brand. Apparently the cheap knock-offs you see on Amazon are sub-standard.

    I think I have paid international shipping on every Collins tool made. They all do what it says on the box.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •