-
Ok the measuring went well. I actually need 1.4 ounces plus any squeeze out and allowance for the chamfers. Yes I put tiny chamfers on the mortises. The tennons had them already.
Here's a pic of the mortise and one of the unassembled cabinet.
Mortise for top.jpg connect the top.jpg
-
A picture says a thousand words. I can see your concern for getting it just right. I hope you post your progress and the finished piece.
Best Regards, Maurice
-
Just the bottom of that mortise probably has enough surface area to be strong enough, and some would squeeze up the sides. I would also try not to have any squeezeout.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules