Today I was using my Minimax FS41 Elite in planer mode and did not set the depth correctly, when I fed the wood in it took a very deep cut, ran for about a foot, then bogged down and stopped. I have not been able to turn it back on. The circuit breaker is not tripped, and the power switch is set to on, but the round white power indicator is not lit. I let is set for 1.5 hours thinking it might be a thermal overload shut off, but it still won't turn on. Hoping it is just a blown fuse rather than a burnt out motor. Any suggestions welcome. Hope to hear from Erik Loza, my original Minimax sales rep (yes, quite a while ago ). Thanks!
Len