[OP]
Contributor
i have wegoma feeder, and need to split the split wheels and install them only on the outside of the shaft (removing the inner wheels). is there some sort of spacer to do this? how do i hold that outer wheel away from the back of the shaft? thanks.
-- dz
Contributor
Doesn’t Martin USA distribute those? Have you tried reaching out to them?
Erik
Ex-SCM and Felder rep
[OP]
Contributor
yep, called them today, they said they didn't know. "first time that question has been asked." they are going to check with the manufacturer.
Contributor
Dave,
you should be able to just reverse the inner wheel to make it single to the outside. This is a newer model with the wing nuts but works the same on the older style with conventional nuts. And also works the same on the Comatic feeders.
E2247611-54A9-473D-8A4A-06C39131A9D0.jpeg
EDFF08A0-E505-4B9C-B5BA-30816955332A.jpg
Last edited by Joe Calhoon; 06-18-2022 at 11:46 AM.
[OP]
Contributor
joe - thanks for this. the two wheels interlock at the hub - are you saying to ignore the interlocking? i'm trying to picture exactly what you're describing.. thanks.
-- dz
Contributor
Yes, just turn it around. The interlocking part holds it to the outside. Then the smooth face of the wheel is facing out to allow tighten with the nut
Last edited by Joe Calhoon; 06-19-2022 at 6:57 PM.
[OP]
Contributor
great - thanks joe.
Posting Permissions
Reply With Quote