Results 1 to 7 of 7

Thread: wegoma feeder question

  1. #1
    Join Date
    Feb 2004
    Location
    Ann Arbor, MI
    Posts
    407

    wegoma feeder question

    i have wegoma feeder, and need to split the split wheels and install them only on the outside of the shaft (removing the inner wheels). is there some sort of spacer to do this? how do i hold that outer wheel away from the back of the shaft? thanks.

    -- dz

  2. #2
    Doesn’t Martin USA distribute those? Have you tried reaching out to them?

    Erik
    Ex-SCM and Felder rep

  3. #3
    Join Date
    Feb 2004
    Location
    Ann Arbor, MI
    Posts
    407
    yep, called them today, they said they didn't know. "first time that question has been asked." they are going to check with the manufacturer.

  4. #4
    Join Date
    Dec 2008
    Location
    Ouray Colorado
    Posts
    1,194
    Dave,
    you should be able to just reverse the inner wheel to make it single to the outside. This is a newer model with the wing nuts but works the same on the older style with conventional nuts. And also works the same on the Comatic feeders.
    E2247611-54A9-473D-8A4A-06C39131A9D0.jpeg
    EDFF08A0-E505-4B9C-B5BA-30816955332A.jpg
    Last edited by Joe Calhoon; 06-18-2022 at 11:46 AM.

  5. #5
    Join Date
    Feb 2004
    Location
    Ann Arbor, MI
    Posts
    407
    joe - thanks for this. the two wheels interlock at the hub - are you saying to ignore the interlocking? i'm trying to picture exactly what you're describing.. thanks.

    -- dz

  6. #6
    Join Date
    Dec 2008
    Location
    Ouray Colorado
    Posts
    1,194
    Yes, just turn it around. The interlocking part holds it to the outside. Then the smooth face of the wheel is facing out to allow tighten with the nut
    Last edited by Joe Calhoon; 06-19-2022 at 6:57 PM.

  7. #7
    Join Date
    Feb 2004
    Location
    Ann Arbor, MI
    Posts
    407
    great - thanks joe.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •