Sunday Afternoon, waiting on glue to dry...

[steven c newman]

And clothes to dry.
Sunday Afternoon, cleaned bench.JPG
And nothing on the bench....time to get the old grinder out, and set up..
Sunday Afternoon, old grinder.JPG
Seems I had quite a "Backlog" of Rusty & Krusty" tools to go through...
Three dollar box,1.JPG
Ya think?

Results?
Sunday Afternoon, rehabs.JPG
1/2 way point. Block plane ready for work...2 chisels cleaned and sharpened...a few drill bits..
Sunday Rehbs, tack hammer.JPG
Little tack hammer will need a handle...
Sunday Rehabs, needs a handle.JPG
As will that 3/4" Firmer chisel..
Sunday Rehabs, Firmer chisel.JPG
Stay tuned...

[steven c newman]

Drill bits...seems the owner just replaced, rather than sharpened..
Sunday Rehabs, Drill bits.JPG
Largest is a #10...a few #8s, #7s and #6s....mainly Irwins...and a few Jennings..

Brace to turn them with..
Sunday Afternoon, NEXT.JPG
Not too sure about a maker...twist bit adapt will be just set aside....
Sunday Afternoon, chuck details.JPG
Them jaws have teeth...too...
Sunday Rehabs, name that chuck.JPG
Barber chuck...but..which one?
Sunday Rehabs, Barber Chuck.JPG
Sweep is 10".

That "automatic" screwdriver is by Millers Falls...
Three dollar box, no. 68.jpg
Almost the same size as my North Bros. No. 35....and, takes the same bits.

Still have a Disston D-8 to clean up....at 12 ppi, it will head to Piqua, OH. along with a 10ppi D-8....teeth are too small for me to see, let alone sharpen...


Clothes are dry, and hauled back upstairs....close the shop.

[steven c newman]

A little research. on that Brace drill.....Millers Falls "Mohawk" No. 262....seems to fit...