My laser is distorting the image when on rotary, sometimes makes it narrow, then it could be stretched, then it might then do a correct size, from the same file sent to the laser and just repeated.
I’m using the same settings I have always used for set up. I have double checked all my settings incl diameter ones to confirm everything is correct.
Also shut down and restarted the computer and laser.
The glass is held by claw to rotate. I’d appreciate any suggestions of what could be causing this and hoping it is something I can fix myself fairly quickly as of course it is always when something needs to go out the door.. I’m thinking the issue is in the rotary attachment itself.
Attached some pictures of what it is doing