I just read about this system and it seems to be pretty easy to use as a system. I'm wondering if anyone here has experience with it and how well it performs with water based poly? I already use the PPS system. Thanks.
I just read about this system and it seems to be pretty easy to use as a system. I'm wondering if anyone here has experience with it and how well it performs with water based poly? I already use the PPS system. Thanks.
I have the older Accuspray version. I'm sure it will spray just fine, but realize it takes a lot of air. It's the easiest to clean gun there is, with the disposable tips, all you have to do is wipe off the needle. It was the gun the PPS system was originally designed for.
I haven't looked up what air volume this version takes, but if it's anything like my plastic 3M gun, a portable compressor is not going to feed it.
Last edited by Tom M King; 06-04-2022 at 7:49 PM.