Goal this morning, was to get the last of the mortises chopped...
A Busy Tuesday. 2 more to do.JPG
And get the 2 end frames to where I could try a full dry fit...
A Busy Tuesday, Dry fit, ends.JPG
Which left just 4 mortises to do...once the dividers were trimmed a bit..
A Busy Tuesday, dividers trimmed.JPG
Then chop a mortise in the center of each of the long rails..
A Busy Tuesday, Divider mortise.JPG
And do a glue up..
A Busy Tuesday, 1st glue up.JPG
Or 2..
A Busy Tuesday, Equalizer.JPG
Extra clamp was because one end was wider (1") than the other...pull it down to equalize things.
And, that was it for most of these tools...
A Busy Tuesday, need cleared off.JPG
Needed to clean all of this mess off...
A Busy Tuesday, Cleared for action.JPG
Because the next task was to set up to raise 6 panels....most of which will need flattened...
Stay tuned..