Well....I said 4 planks to the shop...one had a bit too much wane/barky edge....3 seemed to be about right...
Friday's Cardio, lid blanks.JPG
Width wise, at least....needed to cut them for rough length...tablesaw was busy, so..
Friday's Cardio, set up.JPG
Mark a cut line or two...clamp to the end of the bench..
Friday's Cardio, cut line.JPG
Get the saw moving....
Friday's Cardio, cutting the line.JPG
Will need to joint a few edges. As for that saw?
Friday's Cardio, line cutter.JPG

One of the reasons I like these older saws.....and, once you hold one, you will find it hard to sit the saw back down....that handle was made to FIT a workman's hand....by someone who knew how it should be made.


Went out Rust Hunting the rest of the morning....and picked out a can of stain for this chest..."Colonial Maple"...we'll see how it tests out, later.

That was my Cardio Workout for today....