I have a 2HP. 3PH. blower/motor from an old Cincinati Dust Master 2-stage 55gal. barrel style dust collector that I plan to use for a cyclone setup.
The factory specks for the original dust collector are 1100-CFM. Here's the data sheet on the original dust collector, my model is the 200S https://www.cincinnatifan.com/catalo...ors108-sls.pdf
I'll be adding a cartridge filter for the exhaust so the resistance will be reduced quite a bit, the original filter bag only had 18sq. ft. of surface area & the cartage filter has over 300 sq. ft. of surface area!
Will the reduced air resistance also increase the CFM rating of the blower?
Doug