Using Minwax wipe on poly ( oil based ) on cherry. Fine Woodworking has several positive reviews in the past. Seems very easy to use. First coat wiped on lightly, not much more than wetting the surface. It looks like it is dry in 15 minutes, but waited 2 hours. Wiped on another coat, dried in 15 minutes again, but waited almost 2 hours. Wiped on 3rd coat and called it a day. Following day noted some finish build up - good because not much after the first 2 coats. Light sanding with 320 stearated sandpaper. Got very smooth. But noted scratches from sanding even though it was light and I vacuumed paper frequently to clear. Three more coats the next day, spaced out several hours. Nice finish. Those scratches seem to disappear. Went with 400 stearated and very, very light sanding - one light swipe with vacuuming after each swipe. Scratches!. Following day 3 more coats. Beautiful gloss finish. But looking very closely I can see some of those scratches remaining. My family doesn't notice them. I am really wondering about this sanding business and scratches. In a past project I even used mineral spirits with sanding and I still got scratches. I have seen others questioning this phenomenon. Thoughts?