Sawstop Rails

[Jim Dwight]

If it is rip capacity +~32 inches to get rail length, that suggests 48 inch rails give you 16 inches rip capacity. That doesn't make sense. So the 48 inch rail reference seems to be a guess or otherwise incorrect. Possibly the 52 inch rails since that would be close to 48.

[sean meltvedt]

C99F64BD-2A0B-4B35-AAC5-CAF5CC9C22FC.jpg0D5586B6-006B-4985-9088-CCCBF9FD35F3.jpg

36” rails with the left extension removed gives you an approximate 48” rip capacity. This saw was damaged and the left side table was not serviceable. The rails came from my PCS that I had upgraded to 52”
Cheers
Sean