Lenox Bi-Metal Resaw blade

[Stephen Bandirola]

Thank You.

Yup: Should be no problem.

Erik

[Maurice Mcmurry]

Lenox creates some very fine blades in many types. Does anyone remember "Hack Man" The Muscle Bound promo guy from the 1980's who sawed a locomotive in half with a hand hacksaw?

Screen Shot 2022-05-16 at 7.05.43 PM.png

[Mike King]

I run the Woodmaster CT on my Felder FB510. It is a great blade and I have excellent results with it.

Mike

[Jonathan Jung]

The Trimaster is a great band, Stephen, but it also likes a big saw due to its nature. The CT may be a little more forgiving if you don't have a big, heavy machine.

+1 on the Trimaster. However, I disagree, since I've found that a 1/2" Trimaster runs just fine on a 17" bandsaw. The key is proper tension! After breaking 3 blades I broke down and bought a tensionmeter from Iturra. Have not had a problem since.

[Jim Becker]

I agree that the 1/2" version of the Trimaster may be more forgiving, but I haven't tried it. When I bought mine "a long time ago", it was the 1" version through the saw manufacturer and my MM16 is a 16" saw. It ran fine, but that's still a lot of band to tension and wrap around those small wheels.