Results 1 to 8 of 8

Thread: Swivel stand for positioning vacuum nozzle

  1. #1

    Swivel stand for positioning vacuum nozzle

    I want to set up dust/chip collection for my mortiser. What I need is something that allows me to position a vacuum nozzle close to where the mortise is being cut. I envision a fitting that can be raised/lowered/swiveled that takes a vacuum hose on one side and a nozzle on the other. Although I could make my own with a combination of 3D printing and wood, someone must make something like this. I’ve tried Rockler/Woodcraft/etc with no luck. Anyone know of something like this?

  2. #2
    Join Date
    May 2015
    Location
    NJ
    Posts
    1,363

  3. #3
    Join Date
    Mar 2003
    Location
    San Francisco, CA
    Posts
    10,304

  4. #4
    Join Date
    Mar 2021
    Location
    Sothern Coastal Maine
    Posts
    84
    I use this from Amazon: Loc-Line 80813 Shop Vacuum Kit, 2.5", Blue/Orange https://www.amazon.com/dp/B01LYEMPY1...8MQ5YJ5V9P83J3

  5. #5
    Quote Originally Posted by Bob McBreen View Post
    I use this from Amazon: Loc-Line 80813 Shop Vacuum Kit, 2.5", Blue/Orange https://www.amazon.com/dp/B01LYEMPY1...8MQ5YJ5V9P83J3
    this looks pretty good. i still have to make a stand/holder but it could be much simpler

  6. #6
    Join Date
    Oct 2014
    Location
    Pittsburgh, PA
    Posts
    313
    Quote Originally Posted by Jim Barstow View Post
    this looks pretty good. i still have to make a stand/holder but it could be much simpler
    I use this as well. If you have access to a 3D printer (or know someone who does) there is a guy who designed a few tool mounts.

    https://www.printables.com/model/181...loc-line-25-va

    https://www.printables.com/model/181...rodshaft-for-l

  7. #7
    Join Date
    Jul 2016
    Location
    Lebanon, TN
    Posts
    1,719
    I used the Loc-Line on my PM719T


  8. #8
    Quote Originally Posted by ChrisA Edwards View Post
    I used the Loc-Line on my PM719T

    +1 for my drill press; coupled to the DC w/ Rockler 4" x 2-1/2" adapter. Caveat for Mr. Barstow: the Loc-Line will stay where you put it, but it is not as flexible as you might think. I used all the 'links' in the kit in a single run to provide ample reach and flexibility.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •