i made a bunch of curved mouldings, all of which requires a rabbet on the back. you can see my setup in the picture... but i'm struggling with the best/safest approach to hold and guide the material through the cut. i have to keep some pressure on the front "slope" to keep it flat to the shaper surface, and that, combined with the fact that the meat of the material is right at the cutter is making it difficult to see how to safely guide the material through this cut.
i have lots of Aigner stuff... just curious if any experts can visualize this and educate me on the appropriate way to consider the setup. thanks.
IMG_0080.jpeg