Hi Anibal
Here is a link to a video on calibrating a Hammer A3-31 (which I also own) ….
https://m.youtube.com/watch?v=aEq5C5oovFk
Regards from Perth
Derek
Contributor
Hi Anibal
Here is a link to a video on calibrating a Hammer A3-31 (which I also own) ….
https://m.youtube.com/watch?v=aEq5C5oovFk
Regards from Perth
Derek
Contributor
As I also commented on the video when I saw it...that's not much of a calibration instruction, he only checks that his settings are good. The tricky part is when they are not and there you are not helped much by that video.Originally Posted by Derek Cohen
@Anibal I had the previous version A3-31 before and for that machine there is a very detailed document how to adjust the machine in terms of table parallelism. I assume that's the document you will have pm'd from another member.
Contributor
Hi Ola
The video is helpful in that it shows you what to do to - the bolts to adjust - when calibrating the A3-31.
Do you have a link you your source?
Regards from Perth
Derek
Contributor
I think it's this one. "Think" meaning I thought this was for the latest a3-31 and that I didn't have the link for the previous version anymore, but looking at the pics this seems to be for the previous version a3-31. http://maschinen.felder-gruppe.at/up...Guide_A331.pdf
Last edited by Ola Carmonius; 04-29-2022 at 4:32 AM.
Member
That doc does not appear to be for the current A3 series of machine.
Chris
Everything I like is either illegal, immoral or fattening
Contributor
No it's for previous version. For some strange reason I'm not allowed to see the pictures in the thread start and then there was talk about previous generation a few posts down so I assumed it was that machine this was about. Sorry.
Contributor
To see pictures you must become a contributor which is only six bucks a year. There is a donate button near the top of the page. There are a couple more percs too.
Steve Jenkins, McKinney, TX. 469 742-9694
Always use the word "impossible" with extreme caution
Posting Permissions
Reply With Quote