Results 1 to 9 of 9

Thread: Round & Round

  1. #1
    Join Date
    Jul 2015
    Location
    Pleasant Valley MD. U.S.A.
    Posts
    566

    Round & Round

    "Round & Round"
    This segmented piece is made from Teak there are 96 circles and 224 pieces all together. It was glued up and turned in sections all turned using carbide cutters without a steady rest, the finished size is 7 1/2" x 9" tall and finished with satin lacquer.
    Attached Images Attached Images


    My Handle is Splinterz25 on most forums.

    Jack Of All Master Of None

  2. #2
    Beautiful and original, can't remember seeing one like that.

  3. #3
    Join Date
    May 2015
    Location
    NJ
    Posts
    1,363
    Agreed, very unique and also beautiful.

  4. #4
    Join Date
    Jul 2015
    Location
    Pleasant Valley MD. U.S.A.
    Posts
    566
    Quote Originally Posted by Tim Elett View Post
    Beautiful and original, can't remember seeing one like that.
    Thank you, I also have never seen anything like this thanks for looking and commenting.


    My Handle is Splinterz25 on most forums.

    Jack Of All Master Of None

  5. #5
    Join Date
    Jul 2015
    Location
    Pleasant Valley MD. U.S.A.
    Posts
    566
    Quote Originally Posted by John Kananis View Post
    Agreed, very unique and also beautiful.
    Thank you so much very nice of you to say.


    My Handle is Splinterz25 on most forums.

    Jack Of All Master Of None

  6. #6
    Join Date
    Jan 2015
    Location
    Lake Burton, Northeast Georgia
    Posts
    150
    Okay, based on your numbers, each level of the glue-up is 16 pieces (either straight strips or circles); 6 rows of circles ='s 96 circles, and 8 rows of strips ='s 128 more pieces, 224 altogether.

    Question: how were the circles made? My guess would be dowels of varyings sizes, sliced into 'cookies,' then drilled to hollow-out the cookies.

    Next question: how was the assembly done? With a conventional solid ring glue-up, it's easy to hold it all together with a strap clamp or a metal hose clamp. Can't figure this one out!

    Anyway, nicely done. I enjoy puzzles.

    R.

  7. #7
    Join Date
    Jul 2015
    Location
    Pleasant Valley MD. U.S.A.
    Posts
    566
    Quote Originally Posted by Robert Marshall View Post
    Okay, based on your numbers, each level of the glue-up is 16 pieces (either straight strips or circles); 6 rows of circles ='s 96 circles, and 8 rows of strips ='s 128 more pieces, 224 altogether.

    Question: how were the circles made? My guess would be dowels of varyings sizes, sliced into 'cookies,' then drilled to hollow-out the cookies.

    Next question: how was the assembly done? With a conventional solid ring glue-up, it's easy to hold it all together with a strap clamp or a metal hose clamp. Can't figure this one out!

    Anyway, nicely done. I enjoy puzzles.

    R.
    Thank you Robert, It's not made from Dowels / you would then be seeing end grain: to make it a bit easier to turn all the grain runs horizontal. The circles were made on a drill press with hole saws without the pilot bit, then a jig was made for each size and the center was drilled out half way, so while turning the inside at first they were solid. The glue up for the standard ring was normal but then cut in half on the table saw, the circles were then flattened a bit by sanding top & bottom. After that they (circles) were glued over the seems with CA Glue and a stick keeping each parallel to the opposite side Circle. And the glue up was the easy part.


    My Handle is Splinterz25 on most forums.

    Jack Of All Master Of None

  8. #8
    Join Date
    Jan 2014
    Location
    Near Springville, AL
    Posts
    137
    Amazing work!

  9. #9
    Join Date
    Jul 2015
    Location
    Pleasant Valley MD. U.S.A.
    Posts
    566
    Quote Originally Posted by Jim Hipp View Post
    Amazing work!
    Thank you so much.


    My Handle is Splinterz25 on most forums.

    Jack Of All Master Of None

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •