Results 1 to 4 of 4

Thread: A simple, little table, out of Ash

  1. #1
    Join Date
    Jun 2010
    Location
    twomiles from the "peak of Ohio
    Posts
    12,120

    A simple, little table, out of Ash

    Standing just over 21", with a top that is 7/8" x 19" x 33". Made from four planks of 7/8" x 5-1/2" x 6'5" Ash..to make all the parts. A 1 x 2Pine was made into corner blocks, to attach the top to the base. Aprons and the outside corner of the legs have a bead detail. Ends of the top have bread board ends. Top has a beveled edge on the underside, and a cove detail on the top of the edge..

    Simple Table Project, 1.JPG
    And..
    Simple Table Project, 2.jpg
    End view..
    Simple Table Project, 6.JPG
    Underside view

    All this just to sit a few plants on...in a window
    Simple Table Project, 4.JPG
    Finish is one coat of Amber Shellac, then 1 coat of Clear Gloss Poly....rubbed down with 0000 Steel wool.

    Thanks for looking in.
    A Planer? I'm the Planer, and this is what I use

  2. #2
    Simple perhaps, but a really nice looking piece fo furniture!

  3. #3
    Join Date
    Nov 2021
    Location
    Mid West and North East USA
    Posts
    2,830
    Blog Entries
    2
    I like it as well!
    Best Regards, Maurice

  4. #4
    Join Date
    Feb 2003
    Location
    Leesville, SC
    Posts
    2,378
    Great looking table...
    Army Veteran 1968 - 1970
    I Support the Second Amendment of the US Constitution

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •