Results 1 to 2 of 2

Thread: Laserpro drivers for Macs?

  1. #1

    Laserpro drivers for Macs?

    Can everyone/anyone confirm for sure that I will not be able to pair my Mac up with my Laserpro mercury..... I had a feeling I had seen drivers available for Mac before, but haven't been able to re-find them! I have seen a few posts here regards the cabling of USB to 25pin (DB25?) and sourced one that I could buy.... but if there are no Mac drivers available, then I may choose a different option.

  2. #2
    Jorlink is my go-to for my GCC Explorer parts, if anyone would have them, or know who might it's them!

    Wouldn't hold my breath too long though, my GCC requires a 32 bit computer to run it, the driver won't work with a 64 bit machine. And I know ________ about Mac's
    ========================================
    ELEVEN - rotary cutter tool machines
    FOUR - CO2 lasers
    THREE- make that FOUR now - fiber lasers
    ONE - vinyl cutter
    CASmate, Corel, Gravostyle


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •