I have an old Milwaukee mdl 5650 3.5 horse router that came w/a 1/4" collet.
I want to find a 1/2" collet and am having no luck! If the threading is the same I could buy
another mdl # collet.
Do you think it's feasible??? Thanx
Bruce
I have an old Milwaukee mdl 5650 3.5 horse router that came w/a 1/4" collet.
I want to find a 1/2" collet and am having no luck! If the threading is the same I could buy
another mdl # collet.
Do you think it's feasible??? Thanx
Bruce
Epilog TT 35W, 2 LMI SE225CV's
CorelDraw 4 through 11
CarveWright
paper and pencils
There are some listed on ebay. One mentions checking with the Milwaukee website to make sure it is the right part number
jtk
Last edited by Jim Koepke; 03-06-2022 at 11:18 AM. Reason: removed text
"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)
https://www.milwaukeetool.com/Produc...ets/48-66-1010
Hope this helps
I recently needed to go the other way (1/2” to 1/4”) for my PC 7518. I’ll look for a link to my post and responses, but if you’re in a hurry you can likely find the thread by searching on “collet”. Several third party choices, mine was inexpensive and seems to work just fine.
EDIT: Found “my” thread - hope this helps, best wishes! https://sawmillcreek.org/showthread....r)-for-PC-7518
Last edited by Marty Gulseth; 03-07-2022 at 12:07 AM.
"Never attribute to malice that which can be adequately explained by stupidity" - anon
Is the millwaukke made by PC? I assumed it was made by millwaukee?
Bill D
This one fits the 5300 call them and ask if it also fits you router.
https://www.precisebits.com/gateways...tsNutsHome.htm
Last edited by Keith Outten; 03-07-2022 at 7:27 AM.