Hi everyone --
Still waiting for the electrician to wire up my equipment, but in the mean time, I'm checking what I can check.
I have 3 magnetic bases, each with a dial indicator, and wanted to verify how consistent (or inconsistent) the wagon is, relative to the cast iron table. I have 2 dial indicators on either side of the cast iron table, measuring the edge of the wagon that's closest to the iron. The other dial indicator is for the far side of the wagon.
Setting everything to zero with the wagon locked, I'm seeing deviation of up to 0.010 across the length. Wondering if this is considered "in spec".
If not, I would imagine that changing this is not possible/recommended by an end user, that it would require a service call.
Thanks in advance --
Ned