Hi all,
My son plays warhammer, which involves lots of models and paints. He asked for a small shelf to go above his desk to make some more room. I had some scraps of hemlock from doing the window trim in the house, so decided to do a small shelf with two dividers and a couple sliding doors. The carcass is mitered dovetails to hide the grooves for the doors on the top and bottom:
IMG_1711.jpg
I chopped, sawed and router planed the grooves:
IMG_1785.jpgIMG_1786.jpg
Here's the dry-fitted carcass:
IMG_1819.jpg
More to come...