Looking for a suggestion on under cabinet (flush mount) 12-24v puck lights. Cost isn't a issue. Ideally something with a separate paint able or white bezel.
I was considered the hafele loox line.
Anything I should stear clear of?
Looking for a suggestion on under cabinet (flush mount) 12-24v puck lights. Cost isn't a issue. Ideally something with a separate paint able or white bezel.
I was considered the hafele loox line.
Anything I should stear clear of?
LooX are really good
Tresco makes a solid product.
Hera is really good too - but hard to get a hold of.
L&S has great products too. Not widely know though.
None have paintable bezels. Wouldn't even consider other brands.
FWIW
Circular, puck lights are becoming passe these days. Linear, full width recessed LEDs are where everyone is headed.
FWIW
Circular, puck lights are becoming passe these days. Linear, full width recessed LEDs are where everyone is headed.[/QUOTE]
Dave, any recommendations for the latter?? Thank you, Patrick
Dave, any recommendations for the latter?? Thank you, Patrick
same as above , all 4 have numerous LED options.
To each his own. However, under the cabinet is where recessed linear lights shine; so to speak. Inside a cabinet with a glass door is where one might want a cone of light that a puck produces , for dramatic effect.I don't think led strips would look right in this application (specifically talking under cabinet) though I agree on the interior lighting.
This kitchen only has 2 upper units, and those have flush false panel bottoms. I dont see an way to conceal the linear strips, thoughthay may just be my ignorance. I had actually gone back and forth about any under cabinet lights and decided against, but with them installed I'm second guessing again.
My plan was 2 pucks under each upper.
20220109_092841.jpg
How are you planning on concealing the puck lights ?This kitchen only has 2 upper units, and those have flush false panel bottoms. I dont see an way to conceal the linear strips, though thay may just be my ignorance. I had actually gone back and forth about any under cabinet lights and decided against, but with them installed I'm second guessing again.
LED lites can be tuned to provide warm or cool light. Matching fluorescent color is pretty easy.Stuck with the flouresent that matched my others that are 13 years old, was surprised you could still get them. I'll have to eventually find a way to make myself warm up to the led's.
With a bit of planning , one can recess lights into a "flush" bottom cabinet. Doesn't matter if it's strip or puck, round, square or rectangle. Or whether they are LED, Halogen, Xenon, or Fluorescent.Flush bottoms would not work with what I did
They won't be concealed, or at least the bezel won't. I haven't installed the flush panels yet specifically because of the lighting.
My thought was to do a version of this.
Screenshot_20220109-211514_Instagram.jpg
It's a traditional looking kitchen. Strips of any sort just seem out of place. The hood already has two puck lights that are part of the vent insert. I'd be happy to reconsider the strips if I'm missing something here.
20220109_212605.jpg
20220109_212544.jpg
I'm with you. There are still needs for puck lighting because of how the light looks. The puck lights can also be LED to ensure the color changing ability.
Just because everyone else is getting LED strips doesn't mean they are automatically the best choice.
I agree. But I would not even consider halogen pucks. I know some places are still selling them at very attractive prices, but even free would be too expensive for halogens. Maybe I should be more charitable towards halogens because I've made a LOT of money over the decades keeping halogen display lighting maintained. But I also learned to hate them for the horror show that they are.
I think you’re missing the fact that the strip lights are recessed / dadoed / grooved / routed / into the bottom of your cabinet or flush panel. Instead of boring a “hole” , you’re machining a channel. The lens barely protrudes beyond the bottom and some don’t protrude at all. Just depends on the product you’re using.
Whether you use pucks or strips, the light housing really shouldn’t be visible from most angles. The only exception is if you’re below them looking up. So, the housings really don’t factor into the aesthetic very much. What does , is the beam spread and shape of the light produced.
Like I said earlier , you may prefer a cone and round pool of light with a “hot” center that pucks tend to produces rather than the more even light a strip gives off. We all make trade offs on form over function everyday; so if you like circles better and think it’s better for your cabinets and or lifestyle - I’m not going to try and dissuade you.
I'm familiar with the mounting method of the flush led strips I think they are better in the sides of a cabinet so that they run top to bottom or hidden by the face frame. The strips on the bottom (flush included) just look bad to me regardless of how much (or little) you can see.
You can see the bottoms of these upper cabinets when seated at the island, meaning you will see the led strip (and likewise the puck) the puck just looks better imho. I realize that may be out of favor and not where the trend is.
Dave Sabo, thank you kindly. Patrick