I just finished installing a new white oak floor in our 110 year-old house.
The floor came out great but I missed one spot that didn't get filled/repaired.
The floor has 2 coats of Bona Mega on it, and it is Extra Matte sheen.
20220101_120001small.jpg
There is one board that has a split in it and will likely be a dust mop or sock catcher. I would have epoxied it along with all the other knot holes if I had caught it. Trying to decide the best way to fill/fix.
20220102_140527small.jpg
- I could tape off and carefully fill with epoxy but am worried about the gloss of the epoxy standing out against the matte finish. Is there some way to de-gloss epoxy? Am using West System 205.
- Tape off and fill with CA glue
- Epoxy then abrade and recoat the entire floor (I really don't want to do this)
- Other ideas?