I am building a vanity for our master bathroom. It will be 78" long, with drawers on either side, and doors in the center. The drawer fronts and doors will be inset into the face frame. It will have a single, low, wide vessel sink in the center. The exterior and top will be walnut.

The front corners will be made to have the look of furniture legs. I just finished carving the lambs tongues on these parts, my first time doing anything like this, and I'm quite pleased!

Practice piece on off-cut:
Applied sample finish: Heritage oil finish plus Lockwoods oil soluble dye in dark walnut
PXL_20220101_150022877.MP.jpg

Completed parts:
PXL_20220101_175842711.MP.jpg

I had trouble holding the first part in the vise, so I made this little adapter:
PXL_20220101_170546494.MP.jpgPXL_20220101_170524780.MP.jpg

Here is what is looks like against the cabinet box:
original_bb3dc210-6ccc-4ec8-a839-18ffb72c46cc_PXL_20220101_182105730.MP.jpgPXL_20220101_182126777.MP.jpgPXL_20220101_182114553.MP.jpg