Still learning the many aspects of segmented turning. When you have a feature ring that you are building up from several thin segmented rings (1/4” high) what is the best way to clamp the individual thin rings before glueing it all together.
I use hose clamps or rubber bands to clamp my rings but I am thinking these won’t work very well with a ring that thin — it might collapse in on itself. I’ve tried dry fitting the rings with a hose clamp and it seems to work, but don’t want to get to the glueing and find out that with the added slipperiness of the glue I have a problem on my hands.
Anyone have a special trick for this?
Thanks,
-dan