Mornin’ folks -
Im cross cutting some plywood using a guide and the saw keeps pulling towards the guide. I got so far into the cut and the saw bogged down due to side loading. Some detail:
- Cutting a double thickness of 3/4 birch ply
- Blade is tight and not warped. Maybe 2 years old. 60T Diablo
- Saw is PC 20V
- Blade looks to be parallel with the edge of the saw base
- Guide was clamped tight
Any ideas?
DEC7EB88-03CB-42B4-9277-2A81F78503FC.jpg
Thanks!