Anyone have trouble with their triton router getting jammed up? One of the side handles has a centered button that you can push in and then rotate the handle to make the router go up and down while in a table. With the button pushed in, the router is dis-engaged from the notches in the plunge shafts and as a consequence will freely slide up and down those shafts. My button is stuck "in" and I cant get it to come back out. Consequently the motor will just freely slide up and down the shafts and I really have no control. After I pushed the button in this time and it jammed, I suddenly remembered doing the same thing 2-3 years ago and messed with it for a few weeks to get it unstuck. Anyone have any ideas? I'm really not that mechanically inclined.