I am certain you will be pleased with the results. I'm lucky where my lathe is located I mounted an old monitor to a fan I have at the end of the lathe and I just leave it there takes me about 1 minute to have it working. A good tip I believe is that I found a monitor to which a magnet will stick. I then draw the shape of the cutter on a sheet of mylar which is held on the screen with a couple of magnets and I use a magnet washer over the cutter to give me the thickness I want.
Pete
* It's better to be a lion for a day than a sheep for life - Sister Elizabeth Kenny *
I think this equates nicely to wood turning as well . . . . .