Anyone have any wisdom? I got the cover off. Got the circlip removed. Fan won't budge. It's plastic. Te piece that the circlip was around has 1/2 inch flats on the sides. Does it need to be removed to pull the fan?
Anyone have any wisdom? I got the cover off. Got the circlip removed. Fan won't budge. It's plastic. Te piece that the circlip was around has 1/2 inch flats on the sides. Does it need to be removed to pull the fan?
Looking at their parts list for the saw they don't show a breakdown of the motor's guts. Only suggestion would be to call Delta tech support. brian
Brian
I got it. Just needed to be a bit less afraid to put pressure on the plastic and pull. Saw is reassembled and running well! Now working on a motor door latch (missing) and need to find a fence.
Chris if you can find one a Unifence is in my opinion the best fence ever built. I have a couple and would actually prefer the 32'' long rail over the 50'' one.
Bet there is information over at OWWM's web site on how to remove the fan. Delta didn't make your motor. Most likely Marathon, or WEG made it, depending upon it's age.