Need help identifying my jointer model. It is a J.A Fay and Egan 12 in jointer I had bought 3-4 years ago. Love the style and of course you can’t beat that old iron look/feel. It has a Babbitt bearing I believe and 2 blade head. I wanting to switch to a spiral cutterhead and possibly change the bearings at the same time but not sure about that. I know there are companies out there that will have you send the head unit in to make it identical but I was hoping I may just be able to order it- surely I’m not the only that has done this to this jointer model. Anyways- its a coffin door style body and is most comparable to the model 61- but the difference being the table adjustment location. I can’t find one like this. I have searched for hours on the internet- any help would be appreciated!! Thanks