I want to make a 27" diameter outdoor table. I'm in NJ and it will mostly be in shade. I'm gonna have a vinyl cover made to protect the table from the elements. I'm planning on making the table out of Sepele. I want to have a full-size peace sign inlay in the table. I'm looking for advice on the inlay and wood movement. I want the inlay to be a dark wood, but I haven't decided on what to use. I'd appreciate an suggestions. Woods I'm considering are Ipe (I know this is a good wood for outdoors), bubinga, walnut. There are two different approaches I'm considering for the peace sign. First is to make the tabletop out of sepele, then use the CNC to cut a shallow peace sign pocket, maybe 1/4" deep, then glue the dark wood into the peace sign pocket. I'd have the grain of both woods go in the same direction. The other option is to make the peace sign the same thickness as the sepele, them put it all together with dowel tenons. I'd still have all the grain go in the same direction. I'd appreciate any advice or potential problems.