Results 1 to 2 of 2

Thread: Jessem #02210 Router Table

  1. #1
    Join Date
    Feb 2009
    Location
    Suisun Calif.
    Posts
    28

    Jessem #02210 Router Table

    Can anyone tell if they have ever removed the anti-backlash nut from a jessem router Mast-R-Lift table. Mine is stripped and I’m trying to remove it. Called Jessem but they have not returned my calls. Email them and they referred me to a later model Mast-R-Lift. Which was no help it is configured different then my model. Enclosed is a picture of the one I haveIMG_4197.jpg

  2. #2
    Join Date
    Feb 2009
    Location
    Cedar Park, TX - Boulder Creek, CA
    Posts
    832
    I had to rebuild one of mine, the older version for the Bosch 1617 size routers.

    No way I remember all the details, but its 2 pieces. The notched piece is for adjustment. Whether its threaded onto the other side, or into the plate, I dont know. I don't think it tightens a split sleeve, collet if you prefer. Maybe.

    Mine bound up on the screw and mauled the threads on both the screw and nut. I replaced the screw with some threaded rod, but had to do some tweaking on the nut. Just running a tap thru it didn't work. I think I had to drill it out, maybe back to tap drill diameter, to remove the material that had been swaged inwards.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •