Hello all,
I picked up this miter box on Craigslist a while back for $40. I'm about ready to do the clean up and I wanted to see if anyone had any tips.
My plan is dismantle it and soak in simple green with some light scrubbing. I don't think there's much rust, it's mainly grunge.
It looks like the two "guide slides" (not sure what they're called) were greased to support the movement. Any recommendations on a lubricant after clean-up?
Also, I'd like to stabilize the sticker. some of the edges have curled over. Any tips or suggestions on that?
Thanks!
IMG_1224.jpgIMG_1225.jpgIMG_1227.jpgIMG_1228.jpg