Planning on making a simple coat rack out of oak and don't want to use metal hooks. Came up with this profile, and it would be wider than 3/4 looking at the face/front, thinking 1-1/4. I cut the depth on the table saw and the other cut to remove the scrap on the band saw. I plan to ease the edges etc...
My question is what is an easy efficient way to clean up the cut from the band saw blade? I only need to make 4 or 5 of these, so don't want a jig etc.. I think a hand plane used cross grain would just tear up the edges of the wood? I could just use a sharp hand chisel I guess.
Appreciate any suggestions? Thanks Brian
Coat rack bracket.jpg