Quote Originally Posted by Michael Burnside View Post
I love my supercell.
Same here.
I went from a Rockler 1250 with super dust deputy to the SuperCell and do not regret it.
CFM wise, I measured 700CFM at the impeller with the Rockler but it quickly dropped off to about 300CFM once it was connected to my dust deputy and 4" hose to my tools. The SuperCell I'm getting about 500CFM at each blast gate/4" hose. I can no longer do any more testing though as the SuperCell's suction with a 36mm hose ripped the anemometer blades right off and sent them flying through the shop.
My biggest issue was the space the old system took up. it was almost 3'X4' with super dust deputy and cannister filter for the collector. The SuperCell is only 2'X2' in a nice tight configuration. It definitely saves on space.