My recommendation is you make yourself a router table. I believe you can, fairly easily, make something better than you can buy. My current one also has a home made lift but on your first one you might want a commercially supplied lift. The rest of a router table is just a cabinet, easily made from plywood. I used a sink cut out for the top of mine and edged it with some scrap maple. The top of mine lifts for bit changes. The Portable Cable 15A motor is supported by a carriage that rides on machined steel bars attached to the back of the cabinet. Tilting the top up is VERY handy for bit changes. Mine is shaped like Norm Abram's from New Yankee Workshop fame.
My fence is clamped in place by really short bar clamps that grip the top. NEVER slips. The bar clamps are attached to the fence.