Results 1 to 1 of 1

Thread: Osmo Polyx Satin Looks Wavy

  1. #1

    Osmo Polyx Satin Looks Wavy

    Hello,

    I am finishing walnut veneered shelves Osmo Polyx Satin. The sheen on the finish is coming out wavy. I sanded down to 220 and applied the polyx with the grain in thin coats then wiping of exes, also with the grain. I have done 2 coats and adding a 3rd does not help.

    The only thing I could think of is the veneer glue creating small ripples. I used fairly thin coats and rolled it out with a foam roller. I also sandwiched them in-between 2 boards and used a vacuum press.

    Any thoughts on the cause?

    Sorry if attachments are flipped. They are correct on my computer...

    Robert
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •