Since you are a contractor, Steve, there are other considerations, for sure. Were I in the business, I'd likely feel the same way. I could be wrong, but I "think" that the OP is a non-commercial user. For me (and I suspect for you, too), I'm generally trying to use the best tool for the particular job and the "little thing" really has provided some utility to my personal activities. That may not be the case for others. The only downsides I've identified are less power and depth of cut and if that's a factor, I'll pull out the corded circular saw or my Festool Track Saw, as the case may be.
--
The most expensive tool is the one you buy "cheaply" and often...