We are going to be cutting these parts (see attached image) from 3/4" thick soft pine. The current method is to cut the chamfer first using a V-cut bit, then the second operation uses a 1/4" flat up-cut spiral bit for the thru cut. This necessitates changing the router bit between operations. We will have three other similar parts cut with the same chamfer from the same 3/4" thick material. So - many of these parts to make.
Is there such a thing as a "combination" router bit that combines the V-cut and straight cut portions of these bits into a single 1/4" router bit so we could do both the chamfer and the thru profile cut in a single operation using a single bit?
Thanks,
David
router bit question.jpg