Tired of small leaks in my 2 horse 20 gal air compressor. I have a number of joints in order to have attached a water filter, dust filter, air filter and pressure guage. I have been using a good grade plumbers tape but I still seem to have small leaks that add up over a few hours and I'm low on pressure again. I know there are several tooth paste tubes of stuff that people add around the threads joint before connecting to the next part. I've read a couple reviews where they thought that did the trick.a material that coats the threads that flows , let it set overnight plus some good plumbers tape should stop my problem. Advice from air compressor knowledgable creekers would be greatly appreciated. This constant air loss drives LOML mad because it goes on several times during the day and you can hear it throughout the home. Now you know the real reason I'm looking to fix the problem. If LOML ain't happy, nobody is happy. Any/all ideas and suggestions are Welome!