it will also show tracing out the bolt pattern and inputting the correct diameter
for a perfect fit.
I will include placing the cut part back on the original and aligning the bolts
in the bolt holes
Show tracing a metal part on the drawing table
it will also show tracing out the bolt pattern and inputting the correct diameter
for a perfect fit.
I will include placing the cut part back on the original and aligning the bolts
in the bolt holes
Show tracing a metal part on the drawing table
Last edited by Keith Outten; 07-27-2021 at 10:48 AM.
Nice job Stan. Thanks for the video link.
here is the new watchable video
https://logicgroup.vids.io/videos/ea...-check-the-fit