So I got fed up with lifting my PantoRouter off the floor to use, so I decided to make a small cart, with single drawer storage and utilize the lower section as air filtration for general purpose.
I bought a 110v 450cfm blower ($130) and installed it with the exhaust blowing out the bottom.
I think I have the blower spinning the right way, but it feels awfully wimpy.
The filters are 20"x20"x1" Merv-13.
I have room to possibly put another one of these blowers in the lower section, but I think a $20 box fan would have more CFM air flow.
The support legs as just screwed in place, so I could adjust/modify the base pretty easily.
Thoughts, thanks.
As viewed in this picture, the fan spins counter clockwise.