Results 1 to 2 of 2

Thread: New Planer Sled Design ("Multiwedge")

  1. #1

    New Planer Sled Design ("Multiwedge")

    Hi there. I'm not a frequent poster here, but because there always seems to be a lot of chatter about jointers, planers, and combinations thereof, I thought I would share a new planer sled design (for flattening boards) that I came up with. It's meant to be convenient, easy, and quick to use. (Though most people don't design stuff that's meant to be annoying, right?)

    In any case, I made a video about it here: https://youtu.be/6aB21q58MkU

    I have a small, mostly useless write-up on my dumb blog, but the video seemed to be the best way to show what it's supposed to do.

  2. #2
    Join Date
    May 2005
    Location
    SE South Dakota
    Posts
    1,515
    Thank you Brian, great presentation.

    Bruce
    Epilog TT 35W, 2 LMI SE225CV's
    CorelDraw 4 through 11
    CarveWright
    paper and pencils

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •