Results 1 to 1 of 1

Thread: Y axis not working.

  1. #1

    Unhappy Y axis not working.

    Hi guys,

    So my red/black chinese laser has had a little vacation time, because of RL stuff happening. And i went to start it tonight for a job, that I had just recieved and prepared.
    (Let me just say, that no one has been near the machine during its "vacation")

    However the machine was quite a bit more noisy than it usually is, when starting and it was like the Y axis motor was doing something fishy. And of course i didnt get the weird sounds on video. But suddenly my Y axis keys on the ruida display is not working. X axis is working fine.

    Could it be a dead or dying Y axis motor?

    Its not the first time, that it has done this.

    I have checked all wiring and nothing shows deterioration or loose connections, so im a bit baffled here.

    Update: Have tried switching the drivers from X to Y and still nothing. Both show power and green lights.


    If anyone has any tips or advice/suggestions that I can try, I will happy to hear them

    Thanx in advance.
    Last edited by Soren Christensen; 07-07-2021 at 7:59 PM. Reason: update
    Chinese Red/Black 80watt
    Epilog Mini 24 - 40w
    (still a work in progress)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •