Results 1 to 14 of 14

Thread: Stanley 93 shoulder plane made in England

  1. #1
    Join Date
    Jul 2019
    Location
    Northeast WI
    Posts
    571

    Stanley 93 shoulder plane made in England

    At a local woodworking store, there is a Stanley no 93 shoulder plane for sale. It is brand new, unused, made in England. It has a price tag of $200.

    To me that seems high, but I have been trying to find a shoulder plane somewhere locally.

    It looks like it has been sitting there a while and I'm sure there is reason for that.

    Is there something I am missing here?

  2. #2
    Join Date
    Jun 2015
    Location
    Northern California
    Posts
    663
    Way overpriced and meh quality (at best). Be patient and keep checking for an opportunity to buy a new Lie Nielsen, Veritas or HNT Gordon (Heartwood Tools is the US distributor). Lots of LN and Veritas shoulder planes lately on eBay and even a few HNT Gordons. And, unlike other tools, the prices are not being bid up to the stratosphere. Or put out a WTB in the classifieds right here on the Creek.

  3. #3
    Join Date
    Jul 2019
    Location
    Northeast WI
    Posts
    571
    My only issue is I need to pay cash. I was looking at woodcraft and it looks like they carry Clifton shoulder planes in that price range. Would that be a better choice?

  4. #4
    Join Date
    Jun 2015
    Location
    Northern California
    Posts
    663
    Sorry, I have no experience with Clifton. Their products have a decent, albeit limited, reputation. Maybe someone who has one will chime in.

  5. #5
    Join Date
    Feb 2004
    Location
    Perth, Australia
    Posts
    9,467
    My go-to shoulder planes are Veritas. I especially like the Small (1/2") and Medium (3/4"). My first shoulder plane was the Stanley #93 (1"), and I still have it. While the steel is not the best, it holds an edge long enough for specialised tasks. Think of the #93 as a narrow rebate block plane. It is a low shoulder plane, which makes it easier to hold and use on tenon cheeks (not tippy, like a standard shoulder plane), or where one might use a block plane.

    Of course, $200 is madness. But get one if the price is right.

    Regards from Perth

    Derek

  6. #6
    Join Date
    Sep 2007
    Location
    Longview WA
    Posts
    27,347
    Blog Entries
    1
    It looks like it has been sitting there a while and I'm sure there is reason for that.
    Most likely the price.

    As an owner of a Stanley #93, my advice would agree with others who suggest getting either the Veritas or Lie-Nielsen model.

    As a side note, my #93 shoulder plane isn't used very often. Shoulders are trimmed quicker and cleaner with a chisel sharpened at a low angle.

    jtk
    "A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
    - Sir Winston Churchill (1874-1965)

  7. #7
    Join Date
    Jul 2019
    Location
    Northeast WI
    Posts
    571
    Derek and Jim,

    The reason I have been interested in one is I feel it may do a better job of cleaning up rabbets after my 78 than my little 75 does. The 75 gets the job done, but thought the longer sole of a shoulder plane would help with accuracy

  8. #8
    Join Date
    Feb 2004
    Location
    Perth, Australia
    Posts
    9,467
    Jason, I like the Veritas Small for this. A 1/2” wide blade is nearly always big enough, and the Small is so comfortable in the hand. If you only plan to get one, then a case can be made for the Medium (3/4”).

    Regards from Perth

    Derek

  9. #9
    Join Date
    May 2004
    Location
    N Illinois
    Posts
    4,602
    $200 is HIGH.....Negotiate down or PASS..My 2cents
    Jerry

  10. #10
    Join Date
    Sep 2007
    Location
    Longview WA
    Posts
    27,347
    Blog Entries
    1
    Quote Originally Posted by Jason Buresh View Post
    Derek and Jim,

    The reason I have been interested in one is I feel it may do a better job of cleaning up rabbets after my 78 than my little 75 does. The 75 gets the job done, but thought the longer sole of a shoulder plane would help with accuracy
    IMO, this is a better reason for getting a shoulder plane than using it on M&T work. That is where mine is used the most.

    jtk
    "A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
    - Sir Winston Churchill (1874-1965)

  11. #11
    Join Date
    Jul 2019
    Location
    Northeast WI
    Posts
    571
    Quote Originally Posted by Jim Koepke View Post
    IMO, this is a better reason for getting a shoulder plane than using it on M&T work. That is where mine is used the most.

    jtk

    On the few mortise and tennons I have cut, I have found, as you stated, a chisel a good tool for tuning. Also helpful is Paul sellers method with a router plane were you rest it on the face of the board, set the depth of the blade to the cheek, and swing the router plane across the cheek to make the surface level. After this the chisel to tune works well.

    This method was at least successful for the joints I have cut

  12. #12
    Join Date
    Sep 2007
    Location
    Longview WA
    Posts
    27,347
    Blog Entries
    1
    Quote Originally Posted by Jason Buresh View Post
    On the few mortise and tennons I have cut, I have found, as you stated, a chisel a good tool for tuning. Also helpful is Paul sellers method with a router plane were you rest it on the face of the board, set the depth of the blade to the cheek, and swing the router plane across the cheek to make the surface level. After this the chisel to tune works well.

    This method was at least successful for the joints I have cut
    The "Paul Sellers method" may be older than Paul Sellers > https://sawmillcreek.org/showthread.php?36807

    jtk
    "A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
    - Sir Winston Churchill (1874-1965)

  13. #13
    Join Date
    Jul 2019
    Location
    Northeast WI
    Posts
    571
    May be. He is the first person I have seen use it, so I probably wrongly associated it to him.

    I often wonder how much knowledge and techniques have been lost to father time. If some of the pieces of furniture from long ago could only talk.

  14. #14
    Join Date
    Feb 2004
    Location
    Perth, Australia
    Posts
    9,467
    The first person I saw do this was David Charlesworth, about 25 years ago.

    One tends to attribute a technique to the last person who uses it, not the first.

    Regards from Perth

    Derek

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •